FIRE_AND_FORGET

This operation sends the flight plan data of a flight when it is updated..

This operation sends the correlation status of a flight when it is updated.
CCS starts distributing correlation data for an SFPL when this SFPL is eligible for correlation or if it is MANUALLY_CORRELATED..

In case of dynamic modification of a CDR planning, this operation performs the publication of the new or updated planning of this CDR to the subscribed service consumers.

The publication message contains the description of the planning of the given CDR (the Open/Closed status, upper and lower flight levels, timesheet period, periodicity, ...)..

In case of dynamic modification of a CDR status, this operation performs the publication of the new status and data related to the updated CDR to the subscribed service consumers.

The publication message contains the description of the status of the given CDR.

The CDR status is based on 2 attributes of the publication message:
- cdrStatus (its value is Open or Closed)
- cdrLockStatus (its value is Locked or Unlocked)
cdrStatus is provided only if cdrLockStatus is Locked. If cdrLockStatus is Unlocked, the Open/Closed status of the CDR can be deduced from the timetable.
.

In case of operational configuration change, this operation performs the publication of the new status and data related to the updated ATSUSectorConfiguration to the subscribed service consumers..

This operation publishes the current radio frequencies allocation plan to the subscribed service consumers at each on-line update.
It provides the list of Responsibilities of the atsuSectorConfiguration and the radio frequency allocated to each one of them, as well as the list of frequencies not allocated to any Responsibility.
.

This operation publishes online updates to the configuration of an aerodrome or aerodrome group to subscribed users.
The configuration data that can be changed on-line are:
- current and next aerodrome group configuration
- data related to each aerodrome in the group: aerodrome transition level, runway(s) availability and rates...

Note: an aerodrome group is a set of one or more aerodromes that have inter-dependent runways, e.g. if a runway is in use for departures then another runway cannot be used for arrivals due to conflicting traffic patterns.
.

This operation sends the monitoring aids information of a flight when it is updated. As long as there is no update, the monitoring aids information of the last received message remains applicable.
A first notification is sent when the flight correlate for the 1st time (1st progression report), and then a notification is sent each time a deviation is created, removed or modified (ex: when the deviation amplitude is changed).
The evaluation of each deviation being made by the system in a cyclic pattern, its update (creation, removal, modification) can be delayed by a few seconds regarding the event itself. The maximum delay is determined by the cycle value defined in the dataset..

This operation sends the erroneous AFTN messages information for FDO correction.

Upon reception of an AFTN erroneous message associated to a given SFPL, this message is referred to FDO.

Only the following AFTN messages are referred to FDO by CCS (the other are not yet within the scope of PJ16): ACH, APL, ARR, CHG, CNL, DEP, DLA, FPL, IACH, IAPL, IARR, ICHG, ICNL, IDEP, IDLA, IFPL.
The consumer can receive two other kinds of referred message: blocked and not checked.
The information referralType is used to differentiate an erroneous message referred for correction from a message "blocked" by FDM since an erroneous message for the same SFPL was already referred to FDO.

This operation sends the flight plan data of a flight when it is updated..