DSNA&ENAV
DSNA: the French air navigation service provider
ENAV; the Italian air navigation service provider
CCS OperationalConfigurationDistribution 2.0.0
Abstract
This Service is part of Coflight Cloud Services (CCS), which are primarily designed to support the Virtual Centre concept. As such, these CCS Services support the interactions between the CCS ATM Data Service Provider (ADSP) and Virtual Centre Air Traffic Service Units (ATSUs). The CCS OperationalConfigurationDistribution service is consistent with the other CCS services. It supports the distribution of the following operational configuration data to CWP and operational supervisor consumers according to their subscription to the service:
- the on-line updates of the mapping of the couples of control roles and responsibilities (control volume, ADES, set of runways,...) on the logical positions. - the on-line updates of the radioFrequency allocation.
- the on-line updates of Aerodrome configuration data.
Service retired from 20/03/2023
Note: Only civil flights are handled by CCS services.
This version of the service is intended to be used in 'test mission', which aims at providing services and support to the Customer(s) to enable them to test any version of their ATM system during development.
Service Type
SWIM_COMPLIANT
Life Cycle
Business Activity Type
INFORMATION_MANAGEMENT
Intended Consumer
CIVIL_AIR_NAVIGATION_SERVICE_PROVIDER
Information Exchange Category
FLIGHT_INFORMATION_EXCHANGE
In-Operation Date
01-Jul-2020
Provider
Provider Type
CIVIL_AIR_NAVIGATION_SERVICE_PROVIDER
Point of Contact
General
Operational Needs
CCS OperationalConfigurationDistribution Service supports the distribution of the following operational configuration data to CWP and operational supervisor consumers according to their subscription to the service:
- the on-line updates of the mapping of the couples of control roles and responsibilities (control volume, ADES, set of runways,...) on the logical positions.
- the on-line updates of the radioFrequency allocation
- the on-line updates of Aerodrome configuration data
Functionality
Publish sector configuration
Get sector configuration
Publish aerodrome configuration
Get aerodrome configuration
Publish radio frequencies allocation plan
Get radio frequencies allocation plan
Access and Use
IPR
In accordance with their internal contractual rules on IPRs, DSNA, ENAV and skyguide retain exclusive ownership of the information contained in this document, which is to be deemed as foreground of the Coflight Cloud Services project (aiming at delivering remote flight data processing).
Access to the Service
This service is provided to Service Consumers under a contractual basis signed between the CCS Service Provider and the Service Consumer.
If the service consumer also consumes other CCS services, this Service shall be consumed simultaneously with the other CCS SWIM Services that are part of the contractual agreement between the service consumer and CCS service provider.
This service will be updated to be as much as possible in line with the Service Definition produced by SESAR Virtual Centre activities
Both the SWIM Service Description documents / Protobuf files and the CCS Services are versioned.
The version assigned to SSDs and to Protobuf files is composed by four digits in the form x.y.z.w.
New releases are numbered according to the following rule (compared to the previous version):
- w increased by one: means that some content that could be ignored by the developers changed and the changes do not affect the protobuf files generation. For example, changes in the comments or in the descriptions of services, fields and data structures.
- z increased by one: means that some content is changed by adding (but not changing or removing) some messages and/or data types. The generated protobuf files are expected to be an extension of the previous one and as result they are backward compatible.
- y increased by one: means that the file is changed by changing or removing some operations. The generated protobuf files are not expected to be compatible with the previous one.
- x increased by one: means that the file contains a new baseline. Major changes are expected to be present.
The service version is composed by 3 digits a.b.c assigned according to the following rule:
- a could be 0,1,2 depending on the status of the service with respect to the SWIM registration phase:
0: before the service application (as candidate)
1: if candidate
2: if compliant
- b Increments if major changes have been done with respect to the previous version (modify/remove). No backward compatibility.
- c Increments if minor changes have been done with respect to the previous version (addition/description modified). Full backward compatibility.
Services management review are regularly organized with CCS customers to monitor the usability of the services and the KPI related to the quality of service described in the SLA.
The interface of CCS business services is accessible from outside DSNA premises through Internet using IPV4. An IPSEC link (IKE v1 or IKE v2) is used between CCS provider and CCS customer terminal network equipment.
The CCS provider acts as a certificate authority to provide and validate X.509 certificates. Before service operation, a package including X509 certificate and private key, will be delivered to the customer using the PKCS#12 archive file format.
Mutual authentication with X509 certificates is used between the AMQP broker and its client. Prior to any exchanges of AMQP Messages, the CCS customer shall establish with CCS Provider a TLS session using TLS 1.2 version.
- CCS customer shall provide its certificates when establishing the connection. The certificates shall be valid (nor corrupted, nor revoked). The certificates of the CCS customer allow its identification for the use of the different CCS services (CCS business services at lower level).
- The CCS provider transmit its complete certificate during the connection phase and allow OCSP stapling to allow the CCS customer to check if it is valid or not.
- For the cryptographic algorithms, the authorized cipher suites must be agreed between the CCS provider and the customer based on the standards.
As an ATSU, the CCS business services customer, once identified, has access to all CCS services.
In the case of a Customer that would fail to authenticate 3 times in less than 3 minutes, the IP address would be ban and has to trigger the incident management procedure.
Quality of Service
The service level objectives regarding the availability, response time, throughput and recoverability of CCS Services depend on the purpose (mission) for which the Customer intend to use them (e.g. integration, test, training, operational purpose).
These service level objectives are therefore negotiated with the Customers, based on their safety analysis, and are detailed in the specific Service Level Agreement established with each CCS Customer.
The minimum Bandwidth required to consume CCS services (hypothesis for the technical integration service of 300 simultaneous flight managed by the system) is 10MB/s.
Customer ATSU shall restrict the overall rate of requests to a maximum of 720 request/minutes. The detailed rate limitation per services is detailed in the associated swim service description of each service.
Concepts
Abbreviations
Airspace Configuration
Area Control Centre
Airport of Destination
ATM Data Service Provider
Alerting Service
Advanced Message Queuing Protocol
Air Navigation Service Provider
Area Of Responsibility
Airport Operator
Approach
Air Traffic Control
Air Traffic Control Officer
Air Traffic Control Services
Air Traffic Flow and Capacity Management
Air Traffic Management
Air Traffic Services
Air Traffic Service Unit
Coflight Cloud Services
Controller Working Position
Demand and Capacity Balancing
Direction des Services de la Navigation A0xC3 0xA9rienne (French ANSP)
Extended ATC Planner
European ATM Architecture
Ente Nazionale Assistenza al Volo (Italian ANSP)
Flight Data Distribution
Flight Data Processing System
Flight Plan
General Air Traffic
human machine Interface
International Civil Aviation Organization
Interface Control Document
Identifier
Interface Exchange Requirement
Instrument Flight Rules
Internet Key Exchange
Integrated Network Management and ATC planning
Internet Protocol
Internet Protocol Security protocol
Joint Undertaking
Key Performance Indicator
Local Traffic Manager
MegaByte
Message Exchange Pattern
Multipurpose Internet Mail Extensions
Multi-sector area
Network Operation Plan
Network Time Protocol
Online Certificate Status Protocol
Operational Entity
Public Key Cryptography Standards
Service Definition Document
Single European Sky Air Traffic Management Research
System Flight Plan
Service Level Agreement
SWIM Service Description
Synchronous Serial Interface
Secondary Surveillance Radar
System Wide Information Management
To Be Defined
Transfer Control Protocol
Technical Infrastructure
Tactical Instructions Proposal message
Transport Level Security
Coordinated Universal Time
Wide Area Network
Information
Information Definition
For the exchanged data model, please refer to the SWIM Service Description document (sections 2.1 and 2.2)
Data Structures
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Schema Language
Protocol buffer
Reference
CCS_operationalConfigurationDistribution.proto 4.4.0.1
Technical
Security Mechanism
Mutual authentication with X509 certificates is used between the AMQP broker and its client established within a TLS session
TLS 1.2 is used to provide confidentiality and integrity at transport layer.
IPsec is used to provide confidentiality, authentication and integrity at network (internet) layer
Technical Constraint
CCS provider and CCS customer use the date and time for the operation of each service and they must be able to date the traces and the information passed to the SSI log collector.
NTP is the standard solution to synchronize time accurately. So, CCS Provider and CCS Customer should use, each of them, at least one NTP server (stratum N), integrated in a NTP network containing a stratum 0 reference time clock.
Each services interface of the CCS business services relies on the concept of AMQP queues and topics.
- The CCS customer shall use an implementation of the AMQP 1.0 specification to connect to the CCS provider AMQP 1.0 endpoint.
- The CCS provider endpoint is an AMQP 1.0 broker managing queue and topics.
The message payloads are encoded following a protobuf format.
The message exchange patterns used by the CCS services are request/reply and publish/subscribe. The CCS customer acts as requester and subscriber. The CCS provider acts as responder and publisher.
Concerning publish-subscribe, the CCS customer subscribes to a CCS distribution service by directly listening to an appropriate AMQP topic, which name follows the CCS derivation rules.
The subscription to CCS Distribution Services is not performed via subscription operations, but by connecting to the appropriate AMQP Topic described in the .protobuf files as topic://..
The subscribers can filter the messages they want to receive by using the filter parameters defined for each subscription operation.
Please note that, after subscribing to a CCS Distribution Service, the current repository of messages needs to be obtained from CCS via the get operation defined for each CCS Distribution Service (see "Subscription" section of the distribution operation of the service).
N.B:
- If the CCS platform restarts while the Customer is connected to the AMQP Broker, the current repository of messages is published again.
- The acknowledgement that a Customer receives to his request ("RequestReport") may be received after the data distribution that this request has triggered, as these two messages are managed asynchronously by AMQP Queues and Topics
Concerning request-reply the CCS customer sends a request by sending a message to an appropriate AMQP queue, which name follows the CCS derivation rules, to make a request. The request message contains the name of the queue into the CCS customer listens and in which the reply from the CCS provider is expected.
The Customer is the one that initiates the TCP connection and in case of a Network / Connection failure, it is the responsibility of the CCS customer to try to reconnect regularly.
The AMQP broker creates the physical resources associated with a destination (queue, topic) on demand when messages are actually sent to them.
Permissions on queues and topics (read/write access) are granted based on intended usage. The CCS customer will have:
- Write access on the request queue
- Read access on the reply queue
- Read access on the topic for distribution service
Interfaces
The AerodromeConfigurationProvider service interface definition exposes the operation that allows the consumer (operational supervisor...) to get the current state of a given Aerodrome Group Configuration on request.
Operations
Allows a consumer to get the applicable data related to a given AerodromeGroupConfiguration.
Synchronous
SYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
The AerodromeConfigurationSubscriber service interface definition exposes the operations for publishing on-line updates of Aerodrome Configuration data.
Operations
This operation publishes online updates to the configuration of an aerodrome or aerodrome group to subscribed users.
The configuration data that can be changed on-line are:
- current and next aerodrome group configuration
- data related to each aerodrome in the group: aerodrome transition level, runway(s) availability and rates...
Note: an aerodrome group is a set of one or more aerodromes that have inter-dependent runways, e.g. if a runway is in use for departures then another runway cannot be used for arrivals due to conflicting traffic patterns.
.
Synchronous
ASYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
The RadioFrequencyAllocationProvider service interface definition exposes the operations that allow the consumer (operational supervisor, technical supervisor...) to get the current state of Radio Frequency Allocation data on request.
Operations
Allows a consumer to get the current data related to a given radio frequencies allocation plan or the free frequencies related to a given sector configuration.
radioFrequencyAllocationName could be filled to get data for a specific radioFrequencyAllocation (otherwise, the request is global), and sectorConfigurationName could be filled as well, while subscribedRadioFrequencyAllocation is ignored by CCS..
Synchronous
SYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
The RadioFrequencyAllocationSubscriber service interface definition exposes one operation for publishing on-line updates of Radio Frequency Allocation data.
Operations
This operation publishes the current radio frequencies allocation plan to the subscribed service consumers at each on-line update.
It provides the list of Responsibilities of the atsuSectorConfiguration and the radio frequency allocated to each one of them, as well as the list of frequencies not allocated to any Responsibility.
.
Synchronous
ASYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
This Service Interface exposes the operations that allow the consumer (operational supervisor, technical supervisor...) to get the current state of Sector Configuration data on request.
Operations
Allows a consumer to get the applicable data related to sectorMappings.
This operation returns the SectorMappings: the current SectorMapping and the next SectorMapping (if available) of the requested ATSUSectorConfiguration..
Synchronous
SYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Processing Consideration
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
This Service Interface exposes one operation for publishing on-line updates of Sector configuration data
Operations
In case of operational configuration change, this operation performs the publication of the new status and data related to the updated ATSUSectorConfiguration to the subscribed service consumers..
Synchronous
ASYNCHRONOUS
TI Protocol Methods
transfer
Operation Message
Processing Consideration
Endpoints
Url
For security reasons, the addresses will be communicated only to Customers
Addressable Resource
Interface Binding Description Overview
Information is exchanged in Protobuf format. Protocol buffers or Protobuf are Google's language-neutral, platform-neutral, extensible mechanism for serializing structured data similar to XML, but smaller, faster, and simpler.
Behaviour
The detailed behavior of the service is provided in each operation dedicated section
References
Service Documents
AIRM traceability for CCS Operational Configuration Distribution service payload
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Note: to request access to Confluence, please refer to the point of contact section
Note: to request access to Confluence, please refer to the point of contact section
Validation evidence for CCS Operational Configuration Distribution service
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Note: to request access to Confluence, please refer to the point of contact section
Note: to request access to Confluence, please refer to the point of contact section
Protobuf files describing the exchanged information
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Protobuf file describing the exchanged information common to two or more CCS Services
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Protobuf file describing the metadata used by the CCS Services
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Complete service specification
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/CCS+Operational+Configuration+Distribution+Service
Document that includes the list of all applicable error messages for CCS services
Reference
https://confluenceccs.se-dmf.eu/display/CDFSR/Applicable+Documents
Implemented Standards
This specification contains requirements for describing information services in the context ofInitial System Wide Information Management (iSWIM). The requirements prescribe the minimum set of elements a service descriptionhas to contain
This specification contains requirements forinformation definitions, meaning the formal descriptions of exchanged information, in the context of Initial System Wide Information Management (iSWIM). This contributes to semantic interoperability of information.
This specification contains requirements for system interfaces (e.g. protocols) and for IT infrastructure capabilities required to enable a reliable, secure and efficient exchange of information in the context of Initial System Wide Information Management (iSWIM).This contributes to technical interoperability
Revision Save Date
Mon, 03/25/2024 - 23:20
The service description has currently reached the "PUBLISHED" status.
Schema version
v2