{"informationService":{"serviceAbstract":"AFOD 2.0.0 is a CP1 compliant SWIM service offered by the European AIS Database (eEAD) which is a pan-European aeronautical information service provider, certified against the European Commission Implementing Regulation CIR (EU) 2017/373. \r\nAFOD 2.0.0 provides essential information with regards to enabling the exchange of data with eEAD ADM (AIXM 5.1.1) through a system-to-system connection, using the eEAD AIMSL interfaces. AIMSL (Aeronautical Information Management Service Layer) provides a SOAP Web Services based standard interface to the same ADM functions. \r\nThe users are able to extract data from eEAD using the following general scenario: \r\n1. User sends a SOAP request to AIMSL, \r\n2. AIMSL forwards the request to ADM, \r\n3. ADM performs the requested actions, \r\n4. ADM sends a SOAP response to AIMSL, \r\n5. AIMSL forwards the response to the User. \r\nThe eEAD AFOD 2.0.0 service offers two means of requesting/extracting data from eEAD: \r\n- a feature request method based on OGC Web Feature Service 2.0 with the temporal extension (WFS-TE) \r\n- a dataset extraction method based on OASIS web service notifications (WS-N).","serviceProvider":{"provider":"EUROCONTROL European AIS Database","abbreviation":"EUROCONTROL eEAD","providerDescription":"The Enhanced European Aeronautical Information Services Database (eEAD) is a centralised reference database of quality-assured aeronautical information that enables users to retrieve and download AIS data in real time.","providerType":["AERONAUTICAL_INFORMATION_SERVICE_PROVIDER"],"pointOfContact":[{"name":"eEAD Contact Form","contactInformation":[{"type":"URL","address":"https://www.eurocontrol.int/form/european-ais-database-ead-contac"},{"type":"EMAIL","address":"ead.service@eurocontrol.int"},{"type":"PHONE","address":"+32 999 999 999"}],"role":"Customer Service Management"}]},"serviceCategorisation":{"serviceType":"SWIM_COMPLIANT","lifeCycle":[{"lifeCycleStage":"PROSPECTIVE","from":"2025-02-28"}],"businessActivityType":["INFORMATION_MANAGEMENT"],"intendedConsumer":["AIRPORT_OPERATOR","PROVIDER_OF_DATA_SERVICES","AERONAUTICAL_INFORMATION_SERVICE_PROVIDER","AIR_TRAFFIC_SERVICE_PROVIDER","MILITARY_AIRSPACE_USER","CIVIL_AIRSPACE_USER","CIVIL_AIR_NAVIGATION_SERVICE_PROVIDER","MILITARY_AIR_NAVIGATION_SERVICE_PROVIDER","NETWORK_MANAGER"],"informationCategory":["AERONAUTICAL_INFORMATION_EXCHANGE"],"applicationMessageExchangePattern":[{"name":"REQUEST_REPLY"},{"name":"PUBLISH_SUBSCRIBE"},{"name":"PUBLISH_SUBSCRIBE_WITH_PULL_MECHANISM"}],"geospatialCategorisation":{"description":"Worldwide","region":["Worldwide"],"geometry":{"type":"GeometryCollection","geometries":[{"type":"Point"}]}}},"generalDescription":{"operationalEnvironment":{"operationalNeeds":[{"name":"General Information","description":"AFOD 2.0.0 provides access to the aeronautical data stored in the eEAD. \r\nThe Enhanced European Aeronautical Information Services Database (eEAD) is a centralised reference database of quality-assured aeronautical information that enables users to retrieve and download AIS data in real time. It provides instant access to the most up-to-date digital aeronautical information from the ECAC and ECAC+ areas, from NOTAMs, pre-flight information bulletins (PIBs), briefing facility services and the AIP library. \r\nAFOD 2.0.0 uses OGC Web Feature Service queries and an additional subscription service to provide on-demand aeronautical information encoded in AIXM 5.1.1 format."},{"name":"Data Services","description":"Query and aggregate data from different sources, such as eEAD, in order to produce e.g. flight manuals, FMS (Flight Management System)"},{"name":"Civil/Military Airspace Use","description":"Use aeronautical data and information in preparation and execution of GAT/OAT flight operations."},{"name":"Airport Operations","description":"Provide and use aeronautical information/data supporting airport operations in order to facilitate the oversight of the airside operations, landside operations as well as information management related to the collection and distribution of daily flight information."},{"name":"Aeronautical Information Management","description":"Provide and consume aeronautical information in order to discharge the obligations of the ICAO Member States in line with the Chicago Convention and its Annexes, such as Annex 15 (Aeronautical Information Services), Annex 4 (Aeronautical Charts), facilitate cross-border data coordination, supporting LoAs, SLAs, etc."},{"name":"Air Traffic Services","description":"Use aeronautical information and data in FDP (Flight Data Processing) systems and ARO (Air Traffic Services Reporting Office) services."},{"name":"Civil and Military Air Navigation Services","description":"Use aeronautical information and data supporting the provision of air traffic and flow management, CNS (Communication Navigation Surveillance) services, aeronautical information and meteorologic services, SAR (Search and Rescue) services."},{"name":"Network Management","description":"Use aeronautical information and data for the management and provision of the European ATM Network services including ATFM, ATFCM, IFPS, etc."}],"capabilities":[{"name":"Capabilities","description":"The methods implemented by the service offer a large palette of aeronautical information data, required by customers who consume and provide harmonized and up-to-date data."}]},"functionality":[{"description":"AFOD 2.0.0 provides a query interface by means of the standardized OGC Web Feature Service (WFS) returning existing data according to the applied filters. When temporal filters are used, AFOD 2.0.0 provides a temporal query interface (based on a Temporal Extension (WFS-TE)) returning the requested data in accordance with the AIXM 5.1.1 temporality.","name":"Provide Aeronautical Features in AIXM 5.1.1 Format","realWorldEffect":"AFOD 2.0.0 query web feature service, inspired by WFS 3.0, exposes functionalities that allow more refined filtering capabilities for querying AIXM 5.1.1 features, based on feature types, feature identification, specific property values. It includes temporal and geographic filtering capabilities."},{"description":"AFOD 2.0.0 offers a web service providing AIXM 5.1.1 files for consumption.","name":"Provision of Aeronautical Information Data in a Customized Manner","realWorldEffect":"The AIXM 5.1.1 files are used for maintaining recurrently aeronautical data bases or for applications requiring a large spectrum of data on various bases (temporal e.g. AIRAC cycles, geographical e.g. ECAC area)"}],"accessAndUseConditions":[{"name":"Access","type":"LEGAL_CONSTRAINT","description":"In order to be able to access and use AFOD 2.0.0, Consumers need to become eEAD clients and sign the Client Agreement. \r\nMore in detail: \r\n1. the data consumer has to register as an eEAD Data User or eEAD Commercial User Client, \r\n2. the Organisation of the Data Consumer requires an AIMSL (B2B) license, \r\n3. the Data Consumer user requires an EACP (European Aviation Common PKI) user certificate for authentication/authorisation purposes, \r\n4. the Data Consumer user has to use, as a minimum, sdd-wfs and/or SDDDownloadWebService.","reference":{"description":"ADM XML Primer","url":"https://url.witheld"}},{"name":"Policy","type":"SERVICE_POLICY","description":"The AFOD 2.0.0 consumers may use eEAD data in order to integrate it in data products or facilitate their operations. Reselling eEAD data is prohibited.","reference":{"description":"ADM XML Primer","url":"https://url.witheld"}},{"name":"Fair Use","type":"SERVICE_CONSUMPTION_CONSTRAINT","description":"Customers can be negatively impacted when data usage is disproportionate and for extended periods. As protection mechanism, AFOD 2.0.0 service will restrict excessive requests originated from the same client.","reference":{"description":"AIMSL RefMan ICD External","url":"https://url.witheld"}},{"name":"Authentication","type":"SERVICE_CONSUMPTION_CONSTRAINT","description":"The authentication is based on WS-Security and requires all users to sign the requests using an X.509 certificate received from eEAD."},{"name":"Authorisation","type":"SERVICE_CONSUMPTION_CONSTRAINT","description":"In order to consume the AFOD 2.0.0 services, the Data Consumer user must have the appropriate user roles corresponding to the licenses allocated to their organisation. "}],"dateInOperation":"2025-05-15","qualitiesOfService":{"performance":[{"name":"Time Behaviour - sdd-wfs","description":"Response Time is designed in function of the operation complexity.\r\n- Low Complexity filter criteria in an AIS Data Query, the average response time is less or equal to 6 seconds\r\n- Medium Complexity filter criteria in an AIS Data Query, the average response time is less or equal to 9 seconds\r\n- High Complexity filter criteria in an AIS Data Query, the average response time is less or equal to 22.5 seconds\r\n- Very High Complexity filter criteria in an AIS Data Query, the average response time is less or equal to 75 seconds\r\n\r\n- Low complexity query parameters:\r\n-- (Dynamic) Feature Filter\r\n--- Validity - validTime\r\n--- Identifier\r\n--- ADMExtension.DataSource\r\n--- Interpretation\r\n--- NaturalDescriptorExtension\r\n-- Time slice Projection\r\n--- relevantTime\r\n--- Interpretation\r\n\r\n- Medium complexity query parameters:\r\n-- Any combination of Low complexity filter conditions and\r\n-- (Dynamic) Feature Filter\r\n--- By Feature time slice Simple Properties\r\n-- Time slice Projection\r\n--- By Feature time slice Simple Properties\r\n\r\n- High complexity query parameters:\r\n-- Any combination of filter conditions with:\r\n--- Low complexity\r\n--- Medium complexity and\r\n-- (Dynamic)Feature Filter\r\n--- By Feature time slice complex properties\r\n--- One Spatial Filter Condition\r\n-- Time slice Projection\r\n--- By Feature time slice complex properties\r\n\r\n- Very high complexity query parameters:\r\n-- Any combination of filter conditions with:\r\n--- Low complexity\r\n--- Medium complexity\r\n--- High complexity and\r\n-- (Dynamic)Feature Filter\r\n--- multiple Spatial Filter Condition"},{"name":"Time Behaviour - SDDDownloadWebService","description":"Data Set extractions with: \r\n- Low complexity Data Set Extraction Rules – minimum throughput of 100 MB per 1 minute\r\n- Medium complexity Data Set Extraction Rules – minimum throughput of 100MB per 5 minutes\r\n- High complexity Data Set Extraction Rules – minimum throughput of 100MB per 10 minutes\r\n- Very High complexity Data Set Extraction Rules – minimum throughput of 100MB per 30 minutes.\r\n\r\n- Low complexity data set extraction rules:\r\n-- Feature Interpretation\r\n-- Feature Validity\r\n-- Feature Types\r\n-- Data Provider\r\n\r\n- Medium complexity data set extraction rules:\r\n-- Low complexity filters\r\n-- Feature Time slice simple properties\r\n\r\n- High complexity data set extraction rules:\r\n-- Filter conditions with any of the following:\r\n--- Low complexity filters\r\n--- Medium complexity filters\r\n-- Filter conditions on the Feature Time slice complex properties\r\n-- One Spatial condition\r\n \r\n- Very high complexity data set extraction rules:\r\n-- Filter conditions with any of the following:\r\n--- Low complexity\r\n--- Medium complexity\r\n--- High complexity\r\n-- Multiple Spatial conditions"},{"name":"Capacity - sdd-wfs","description":"The throughput of the service has a capacity of 22000 requests per work day."},{"name":"Capacity - SDDDownloadWebService","description":"The throughput of the service has a capacity of 2000 requests per work day."}],"reliability":[{"name":"Availability","description":"The availability of AFOD 2.0.0 Service is at least 99,975%."},{"name":"Recoverability","description":"The unplanned unavailability of AFOD 2.0.0 services shall not exceed 30 minutes (RTO = 30 minutes). In case of incidents AFOD 2.0.0 service ensures that no data is lost (RPO = 15) followed by operational procedures to recover potential data losses."}],"security":[{"name":"Confidentiality","description":"When speaking about data confidentiality, data is encrypted at the application or Simple Object Access Protocol (SOAP) level, above the transport layer. AFOD 2.0.0 service is accessed via HTTPS over a connection which encrypts messages and payloads using mTLS protocol."},{"name":"Integrity","description":"The AFOD 2.0.0 service payloads are wrapped with MD5 checksum algorithm providing the possibility to verify that data didn't suffer unintended corruption. Further, data integrity is ensured by the mTLS (which is based on TLS v1.2)."}]},"serviceSupport":[{"name":"eEAD Service Desk Contact Form and Email","contactInformation":[{"type":"URL","address":"https://www.eurocontrol.int/form/european-ais-database-eEAD-contac"},{"type":"EMAIL","address":"eEAD.service@eurocontrol.int"}],"role":"eEAD Customer Service for general information and service support."}],"validation":[{"type":"SELF_VALIDATION","description":{"validationSteps":"eEAD is a certified service, compliant with the applicable EU regulatory framework, including, but not limited to, COMMISSION IMPLEMENTING REGULATION (EU) 2017/373. \r\nThe validation process is part of software development methodology covered in an assessment and verification management plan approved by the eEAD Oversight Authority. \r\nValidation Steps: \r\n* SQT (Software Quality Test) / FAT (Factory Acceptance Test) dry run \r\n* FAT (Factory Acceptance Test) \r\n* SAT (Site Acceptance Test). \r\nThe whole process is subject to EASA oversight and is formalised with a letter of acceptance.","validationResults":"Validation and acceptance are concluded with reports as per each validation test step.","evidence":"Validation reports are available upon request. Due to the confidentiality status of the documents a non-disclosure agreement may be required."}}]},"informationDescription":{"informationDefinition":{"reference":[{"description":"The eEAD Aerospace Data Repository (ADR) implements the Flexible Use of Airspace (FUA) data model extension which supports: AMC - manageable areas (D_AMC, R_AMC), conditional routes (CDR) and Free Route Airspace (FRA). The supported feature extensions can be found using the following link: https://aixm.aero/schema/5.1.1/extensions/EUR/eEAD/ADR/eEADADR_Features.xsd","url":"https://aixm.aero/schema/5.1.1/extensions/EUR/eEAD/ADR/eEADADR_DataTypes.xsd"},{"description":"AIXM","url":"https://aixm.aero"}]},"filtering":{"capability":[{"name":"OGC Filter Encoding 2.0 Encoding Standard - Spatial Filtering","description":"AFOD 2.0.0 supports the retrieval of AIXM 5.1.1 features located fully or partially in a referenced airspace identified by its gml:identifier (UUID). The following spatial operators are supported: Beyond, Contains, Crosses, Disjoint, DWithin, Equals, Intersects, Overlaps, Touches and Within. ","reference":{"description":"ADM XML Primer - Section 2.3.6.1.6","url":"https://ost.eurocontrol.int/sites/eEADSSI/eEADssi/SDD-AIXM%205.1.1/Transition%20to%20SDD/Reference%20Documents/SDD%20XML%20Primer.zip"}},{"name":"OGC Web Feature Service (WFS) Temporality Extension","description":"Temporal filters based on WFS-TE supporting the following temporality use cases: 3,4,6,7,8.","reference":{"description":"OGC Web Feature Service (WFS) Temporality Extension ","url":"https://portal.opengeospatial.org/files/?artifact_id=58922"}},{"name":"OGC Web Feature Service (WFS) - Property Based Filtering","description":"AFOD 2.0.0 implements the following comparison operators: PropertyIsEqualTo, PropertyIsNotEqualTo, PropertyIsLessThan, PropertyIsGreaterThan, PropertyIsLessThanOrEqualTo, PropertyIsGreaterThanOrEqualTo, PropertyIsLike. \r\nLogical operators are also supported but does not implement additional functions."}]},"sourceOfInformation":"1. AIS Providers migrated to eEAD as static Data Providers. \r\n2. eEAD Data Operations Provider (DOP), for the world-wide minimum static dataset. \r\n3. eEAD as certified source of information AIS Provider-CIR(EU)2017/373."},"technicalDescription":{"technicalConstraint":[{"name":"MTOM Download Size Limit","description":"In case the message \"HTTP ERROR 500 - Internal server error\" occurs, it is possible that the query is producing an MTOM file exceeding the size limit of 750 MB. In such case it is recommended to refine the query."},{"name":"Conformance to WFS Standard Operations \"Remote resolve\"","description":"Not implemented."},{"name":"Conformance to WFS Standard Operations \"Standard joins\"","description":"Not implemented."},{"name":"Conformance to WFS Standard Operations \"Spacial joins\"","description":"Not implemented."},{"name":"Conformance to WFS standard operations \"Temporal joins\"","description":"Not implemented."},{"name":"CountDefault Constraint","description":"As recommended in OGC WFS Profile best practices document, eEAD has constrained the CountDefault parameter to a value of 200. Consequently, all WFS requests that do not specify a value for the \"count\" parameter will return at most 200 results."},{"name":"Spatial Filter","description":"WFS and WFS-TE queries referring to an Airspace support the specification of a buffer area around the Airspace. \r\nFeatures located fully or partially inside the buffer area are retrieved even if they are not inside the Airspace. \r\nThe buffer area can be specified in any unit of measure."},{"name":"Temporal Filter","description":"With reference to OGC Web Feature Service (WFS) (OGC 09-025r2) AFOD 2.0.0 supports all temporal filters. \r\nWith reference to OGC Web Feature Service (WFS) Temporality Extension (OGC 12-027r3) AFOD 2.0.0 does not implement the following use cases: Use case 1 and Use case 2.","reference":{"description":"OGC Web Feature Service (WFS) (OGC 09-025r2)","url":"https://portal.ogc.org/files/09-025r2"}},{"name":"Data Consumption","description":"The AFOD 2.0.0 services are exposed via a technical infrastructure (AIMSL). AFOD 2.0.0 is implemented using a standard SOAP Web Services protocol. \r\nTo avoid negative impact, when data usage is disproportionate and for extended periods, AIMSL is responsible for monitoring and limiting large amounts of requests in short periods of time (to be updated)."}],"serviceMonitoring":{"monitoringDescription":"Not available to consumer."},"behaviour":[{"name":"Normal Conditions","description":"The behaviour under normal conditions: \r\n- for sdd-wfs service, the Data Consumer sends the WFS or WFS-TE SOAP request and expects the corresponding SOAP response; the details of accepted requests are covered by ADM XML Primer section 2.3.6.2. \r\n- for SDDDownloadWebService, the Data Consumer creates extraction rule and subscription within eEAD in order to define WHAT DATA should be downloaded and WHEN the dataset generation execution should be performed.\r\n\r\nYou can find guidance on how to build parameter sets in the Operational User Handbook - Data User, which can be found in eEAD Knowledgebase. \r\n\r\nFor download jobs, using AIMSL file distribution, the user will be provided with functionality that: \r\n* Enables an AIMSL publish/subscribe topic for every subscribed user \r\n* Notifies subscribed users about any download job status changes and errors via the created AIMSL topic \r\n* Creates download and log files \r\n* Provides a SOAP endpoint, registered as AIMSL Proxy, which accepts a download identifier and returns the log and download file matching the given identifier. \r\n* Cleans up the created files and topics after the download. \r\nThe details of accepted requests are covered by ADM XML Primer section 2.3.6.2."},{"name":"Error Messages and Error Handling","description":"All SOAP responses provide feedback of type information, warning or error depending on the execution success."},{"name":"Error Codes and Expected Effects","description":"The complete list of the SOAP response feedback is available in the ADM XML Primer document, appendix A.2 Error, info and warning messages supported by SDD.","reference":{"description":"ADM XML Primer Error Codes","url":"https://ost.eurocontrol.int/sites/eEADSSI/eEADssi/Forms/AllItems.aspx?RootFolder=%2Fsites%2FeEADSSI%2FeEADssi%2FMyeEAD%2FRelease%2015%2FSDD"}}]},"references":{"serviceDocument":[{"documentType":"INFORMATION_DEFINITION","title":"AIRM Semantic Correspondence","version":"NA","reference":{"description":"The semantic correspondence with AIXM 5.1.1 can be found here:","url":"https://airm.aero/developers/advanced-search/1.2.0/Aeronautical%2520information?model=ContextualModel"},"description":"urn:aero:airm:1.2.0:ContextualModel:ATMBusinessTerms:Aeronautical_information\r\n"}],"implementedStandard":[{"title":"Use of GML for Aviation Data","version":"12-028r1","reference":{"description":"Use of Geography Markup Language (GML) for Aviation Data","url":"https://portal.ogc.org/files/?artifact_id=62852"},"description":"The GML Profile for aeronautical data is limited to 2D elements and includes only the features necessary for encoding geometries of type point, line/curve and polygon/surface (outer boundaries only). \r\nThe following components of GML are out of scope for the AIXM GML Profile: Topology, Linear Referencing, Coverages. \r\nThis additional GML component necessary to the ISO 19139 (gco /basicTypes.xsd), which is imported in the GML and AIXM metadata, needs additional types. These types are not included in this profile.","standardType":"SERVICE_STANDARD","conformanceStatement":"AIXM is built on a foundation of ISO standards, such as ISO 19107 (Spatial Schema), ISO 19108 (Temporal Schema), and ISO 19136 (Geography Markup Language, GML). \r\nThese standards facilitate the interoperable exchange of spatial information in and between various application domains."},{"title":"OGC Web Feature Service","version":"2.0","description":"This International Standard specifies the behaviour of a service that provides transactions on and access to geographic features in a manner independent of the underlying data store. It specifies discovery operations, query operations, locking operations, transaction operations and operations to manage stored parameterized query expressions.","standardType":"SERVICE_STANDARD","conformanceStatement":"The service is partially conform with the standard as per Technical Constraints section of the current service description."},{"title":"SOAP","version":"1.1","description":"SOAP is a messaging protocol specification for exchanging structured information in the implementation of web services in computer networks. It uses XML Information Set for its message format, and relies on application layer protocols, most often Hypertext Transfer Protocol (HTTP), although some legacy systems communicate over Simple Mail Transfer Protocol (SMTP), for message negotiation and transmission.","standardType":"EUROCONTROL_SPECIFICATION_FOR_SWIM_TECHNICAL_INFRASTRUCTURE","conformanceStatement":"The service is conformant with WS SOAP requirements from SWIM TI Yellow Profile."},{"title":"XML","version":"1.0","description":"Extensible Markup Language (XML) is a markup language and file format for storing, transmitting, and reconstructing arbitrary data. It defines a set of rules for encoding documents in a format that is both human-readable and machine-readable.","standardType":"EUROCONTROL_SPECIFICATION_FOR_SWIM_TECHNICAL_INFRASTRUCTURE","conformanceStatement":"The Service Interface Binding supports the Extensible Mark-up Language (XML) 1.0. (as per SWIM-TIYP-0029 requirement)"},{"title":"OGC Web Feature Service - Temporal Extension (WFS-TE)","version":"3.0","reference":{"description":"OGC 12-027r3","url":"https://portal.ogc.org/files/?artifact_id=58922"},"description":"The temporality extension has been developed in order to align the OGC WFS 2.0 and FES 2.0 standards with the AIXM 5.1.1 Temporality Concept. It allows retrieving data in AIXM 5.1.1 format via OGC WFS 2.0 requests. ","standardType":"SERVICE_STANDARD","conformanceStatement":"AFOD 2.0.0 is conform with AIRS (Aeronautical Information Request Service)."},{"title":"AFOD 2.0.0 is as defined in AIRS service definition","reference":{"description":"AIRS Service Defintion","url":"https://swim-eurocontrol.atlassian.net/wiki/spaces/ASW/pages/60031028/Aeronautical+Data+Set+Management+Service+-+Service+Definition"},"description":"We have added a subscription mechanism WS-N.","standardType":"EUROCONTROL_SPECIFICATION_FOR_SWIM_SERVICE_DESCRIPTION","conformanceStatement":"AFOD 2.0.0 fulfills the SWIM conformity as a subscription mechanism has been added on top."}]},"serviceInterface":[{"name":"SDD Query Service (sdd-wfs)","description":"The Query Service for AIXM 5.1.1 is based on the Open Geospatial Consortium Web Feature Service Interface Standard (WFS).","schema":{"description":"The DescribeFeatureType operation returns a schema description of feature types offered by a WFS instance.","url":"url:withheld"},"provisionSide":"PROVIDER_SIDE","endpoints":[{"name":"sdd-wfs","description":"The WSDL document defines the service-specific properties of a /sdd-wfs/wfs WFS implementation; it specifies available endpoints and alternative bindings.","reference":"","url":"url:withheld"}],"operations":[{"name":"wfs.getCapabilities","description":"The GetCapabilities operation generates a service metadata document describing a WFS service provided by a server.","idempotency":"IDEMPOTENT","messages":[{"name":"GetCapabilitiesRequest","direction":"IN"},{"name":"GetCapabilitiesResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"},{"name":"wfs.describeFeatureType","description":"The DescribeFeatureType operation returns a schema description of feature types offered by a WFS instance.","idempotency":"IDEMPOTENT","messages":[{"name":"DescribeFeatureTypeRequest","direction":"IN"},{"name":"DescribeFeatureTypeResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"},{"name":"wfs.getPropertyValue","description":"The GetPropertyValue operation allows the value of a feature property or part of the value of a complex feature property to be retrieved from the data store for a set of features identified using a query expression.","idempotency":"NON_IDEMPOTENT","messages":[{"name":"GetPropertyValueRequest","direction":"IN"},{"name":"GetPropertyValueResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"},{"name":"wfs.getFeature","description":"The GetFeature operation returns a selection of features from a data store. Ref WSDL & OGC","idempotency":"NON_IDEMPOTENT","messages":[{"name":"GetFeatureRequest","direction":"IN"},{"name":"GetFeatureResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"},{"name":"wfs.listStoredQueries","description":"The ListStoredQueries operation lists the stored queries available at a server.","idempotency":"IDEMPOTENT","messages":[{"name":"ListStoredQueriesRequest","direction":"IN"},{"name":"ListStoredQueriesResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"},{"name":"wfs.describeStoredQueries","description":"The DescribeStoredQueries operation provides detailed metadata about each stored query expression that a server offers.","idempotency":"IDEMPOTENT","messages":[{"name":"DescribeStoredQueriesRequest","direction":"IN"},{"name":"DescribeStoredQueriesResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"}],"messages":[{"name":"wfs-resp:ServiceExceptionReport","description":"ServiceExceptionReport container for error messages. Exception reporting.","isError":true,"schema":{"description":"Todo: add ref: (owsExceptionReport.xsd) wfs-responses - wsdl - xsd - exception report.","url":"url:withheld"}}],"serviceInterfaceBinding":{"name":"SWIM_TI_YP_1_0_WS_SOAP","description":"A WFS-2.0 implementation includes alternative SOAP bindings for WFS interfaces."},"networkInterfaceBinding":{"name":"IPV4_UNICAST","description":"SWIM TI Yellow Profile specification"},"messageExchangePattern":"REQUEST_REPLY"},{"name":"SDD Download Web Service ","description":"This request fetches exported AIXM 5.1.1 files, based on the defined parameter set.","provisionSide":"PROVIDER_SIDE","endpoints":[{"name":"SDDDownloadWebService","description":"For security reasons, the addresses will be communicated only to customers.","reference":"","resourceType":"URL","url":"url:withheld"}],"operations":[{"name":"downloadAixmMessageFile","description":"Retrieves a specific download AIXM 5.1.1 XML file using a notifications process.\r\nThe steps of the above-mentioned process are as follows: \r\n1. User creates a new Extraction rule and Subscription. \r\n2. System automatically creates a \"topic\" within AIMSL per user who is specified as \"Subscriber\" for the download. \r\n3. The specified user may subscribe to the appropriate topic and recurrently poll for new status of an active download job. To subscribe, user shall use an existing pull point, which was created prior the subscription request.\r\n4. The appropriate topic expression should be set as \"sdd:<user_id>\". \r\n5. Once the system starts dataset generation job, every status change of the active generation process is notified to the topic. Possible values are QUEUED, PROCESSING, FINISHED, FAILED and CANCELLED. \r\n6. When the status changes to FINISHED, the id of the created file is provided with the notification as the <downloadFileId>. \r\nIt is needed to request the download result via WS operation downloadAixmMessageFile - see ADM XML Primer, section 2.3.2.4 \"Download Operations\".","parameters":[{"name":"downloadFileId","description":"The unique ID of the created file which is provided with a notification.","type":"string"}],"idempotency":"IDEMPOTENT","messages":[{"name":"GetDownload","direction":"IN"},{"name":"DownloadResponse","direction":"OUT"}],"binding_method":"SWIM_TI_YP_1_0_WS_SOAP"}],"messages":[{"name":"DownloadResponse","description":"Errors are provided with DownloadResponse or SOAP Fault Error Messages.","schema":{"description":"sdd-ws-download.xsd","url":"https://url.withheld"},"isError":false}],"serviceInterfaceBinding":{"name":"SWIM_TI_YP_1_0_WS_SOAP","description":"The web service is bound to the SOAP messaging protocol using Document style. "},"networkInterfaceBinding":{"name":"IPV4_UNICAST","description":"SWIM TI Yellow Profile specification"},"messageExchangePattern":"REQUEST_REPLY"}],"descriptionInformation":{"descriptionIdentification":{"title":"Aeronautical Feature On Demand","referenceDate":"2025-05-15","edition":"1.0"},"abbreviations":[{"name":"ADR","description":"Airspace Data Repository"},{"name":"AFOD","description":"Aeronautical features on demand"},{"name":"AIM","description":"Aeronautical Information Management"},{"name":"AIMSL","description":"AIM Service Layer"},{"name":"AIP","description":"Aeronautical Information Publication"},{"name":"AIRAC","description":"Aeronautical Information Regulation and Control"},{"name":"AIRM","description":"ATM Information Reference Model "},{"name":"AIS","description":"Aeronautical Information Services"},{"name":"AIXM","description":"Aeronautical Information Exchange Model"},{"name":"AMC","description":"Airspace Management Cell"},{"name":"ARO","description":"Air Traffic Services Reporting Office"},{"name":"ATFCM","description":"Air Traffic Flow and Capacity Management"},{"name":"ATFM","description":"Air Traffic Flow Management"},{"name":"ATM","description":"Air Traffic Management"},{"name":"CDR","description":"Conditional Route"},{"name":"CIR","description":"Committed Information Rate "},{"name":"CNS","description":"Communication, Navigation & Surveillance"},{"name":"D_AMC","description":"AMC - manageable Danger Area"},{"name":"DOP","description":"Data Operations Provider"},{"name":"eEAD","description":"Enhanced European AIS Database"},{"name":"eEAD ADR","description":"eEAD Airspace Data Repository"},{"name":"EASA","description":"European Union Aviation Safety Agency"},{"name":"ECAC","description":"European Civil Aviation Conference"},{"name":"FAT","description":"Factory Acceptance Testing "},{"name":"FCM","description":"Flow and Capacity Management"},{"name":"FDP","description":"Flight Data Processing"},{"name":"FMS","description":"Flight Management System"},{"name":"FRA","description":"Free Route Airspace"},{"name":"FUA","description":"Flexible Use of Airspace"},{"name":"GAT","description":"General Air Traffic"},{"name":"GML","description":"Geography Markup Language"},{"name":"GUID","description":"Globally Unique Identifier"},{"name":"HTTP","description":"Hypertext Transport Protocol "},{"name":"HTTPS","description":"Secure HTTP"},{"name":"ICAO","description":"International Civil Aviation Organization"},{"name":"ICD","description":"Interface Control Document"},{"name":"IFPS","description":"Integrated Initial Flight Plan Processing System"},{"name":"ITP","description":"Information Technology Provider"},{"name":"MTOM","description":"Message Transmission Optimization Mechanism"},{"name":"OAT","description":"Operational Air Traffic"},{"name":"OGC","description":"Open Geospatial Consortium"},{"name":"R_AMC","description":"AMC manageable Restricted Area"},{"name":"RPO","description":"Recovery Point Objective"},{"name":"RTO","description":"Recovery Time Objective"},{"name":"SAR","description":"Search and Rescue"},{"name":"SAT","description":"Site Acceptance Testing "},{"name":"SDD","description":"Static and Dynamic Data (eEAD)"},{"name":"SLA","description":"Service Layer Agreement"},{"name":"SLS","description":"Service Level Specification"},{"name":"SOAP","description":"Simple Object Access Protocol"},{"name":"SQT","description":"System Quality Testing"},{"name":"SWIM","description":"System-Wide Information Management"},{"name":"TLS","description":"Transport Layer Security"},{"name":"URL","description":"Uniform Resource Locator"},{"name":"UUID","description":"Universally Unique Identifier"},{"name":"VPN","description":"Virtual Private Network"},{"name":"WFS","description":"Web Feature Service"},{"name":"WSDL","description":"Web Service Description Language"},{"name":"XML","description":"Extensible Markup Language"}]},"serviceIdentification":{"name":"Aeronautical Feature On Demand","version":"2.0.0"}}}