ADS-C Ground Distribution SWIM Service

Abstract

The ADS-C Ground Distribution Service distributes to ground users the ADS-C data collected from ATS B2 equipped aircraft by the ADS-C Common Service. It supports a Publish/Subscribe Push Message Exchange Pattern for the distribution of ADS-C data, flight status changes and Request/Reply Message Exchange Pattern to support the creation of Demand Contract Requests and to query flight status by ground users.

This service definition summarizes the service as defined in the full specification EUROCONTROL Specification for Data Link Ground Distribution SWIM Services. The specification should be considered the primary reference. Please consult it for complete and authoritative information.

CP1

Categorisation

Service Type

SERVICE_DEFINITION

Business Activity Type

COMMUNICATION_NAVIGATION_SURVEILLANCE

Intended Consumer

AIRPORT_OPERATOR
AIRSIDE_GROUND_HANDLER
CIVIL_AIR_NAVIGATION_SERVICE_PROVIDER
CIVIL_AIRSPACE_USER
MILITARY_AIR_NAVIGATION_SERVICE_PROVIDER
NETWORK_MANAGER

Intended Provider

COMMUNICATION_NAVIGATION_AND_SURVEILLANCE_SERVICE_PROVIDER

Information Exchange Category

FLIGHT_INFORMATION_EXCHANGE

Application Message Exchange Pattern

ONE_WAY
PUBLISH_SUBSCRIBE
SYNCHRONOUS_REQUEST_REPLY

Geospatial Categorisation Description

This service shall provide information for the European ATM Network.

Provider

EUROCONTROL

Description

EUROCONTROL is an intergovernmental organization with 42 Member and 2 Comprehensive Agreement States.

Type

NETWORK_MANAGER

Point of Contact

Restricted

Contact Information

Restricted

Name

Operational Needs

Description

The demonstration of an ADS-C Common Service to collect and distribute ADS-C data from flights has been achieved by SESAR PJ38 (ADSCENSIO). The SESAR PJ38 deliverable identified operational needs and benefits of such an ADS-C Common Service.

Name

Information Exchange Requirements

Description

The SWIM ADS-C Ground Distribution Service shall be implemented over a Technical Infrastructure conformant with the SWIM-TI Yellow Profile (v1.1+) Infrastructure Capabilities Specification. Conformance with the SWIM-TI Yellow Profile Infrastructure Capabilities Specification is achieved by satisfying the requirements of the Infrastructure Capabilities of the SWIM-TI Yellow Profile (v1.1+)

Name

Capabilities

Description

The ADS-C Ground Distribution Service enables a number of operational use cases that are described in the EUROCONTROL Specification for Data Link Ground Distribution SWIM Services: Subscribe to ADS-C Messages by Specific ICAO 24-bit Aircraft Addresses. Subscribe to ADS-C Messages matching a Filter Condition. Receive Messages from Predefined Subscriptions. Enables consumer to perform a Demand Contract Request. Enables a consumer to query Flight Status details about a flight. ADS-C Ground Distribution Service Status Monitoring.

Name

Subscribe to ADS-C Messages by Specific ICAO 24-bit Aircraft Addresses

Description

The service consumer shall be able to subscribe to a specific list of aircraft identified by their ICAO 24-bit aircraft address.

Real World Effect

The service consumer receives updates whenever there is a message available in the ADS-C Common Service.

Name

Subscribe to ADS-C Messages matching a Filter Condition

Description

The service consumer shall be able to subscribe to a list of flight matching a filter condition.

Real World Effect

The service consumer receives updates whenever there is a message available in the ADS-C Common Service that match its filtering criteria.

Name

Receive Messages from Predefined Subscriptions

Description

The service consumer shall be able to receive a number of predefined subscriptions which are readily available without requiring the establishment of a specific filter. The specific set of predefined subscriptions and their filters is left as an implementation option.

Real World Effect

The service consumer receives updates from its chosen predefined subscription.

Name

Enables consumer to perform a Demand Contract Request

Description

The service consumer shall be able to perform a demand contract request to the ADS-C Ground Distribution Service. The demand contract request is processed by the ADS-C Common Service and, if successful, relayed via the ATN network to the aircraft.

Real World Effect

The ADS-C Common Service will perform a demand contract request to the intended aircraft through the ATN network.

Name

Enables a consumer to query Flight Status details about a flight.

Description

The service consumer shall be able to query the following details about a flight: ICAO 24-bit aircraft address, Status, Last Report, Periodic and Event Contract settings.

Real World Effect

The service consumer receives the intended detail about the flight.

Name

ADS-C Ground Distribution Service Status Monitoring

Description

The service consumer shall be able to receive technical messages about the status and health of the service.

Real World Effect

The service consumers receives periodic updates of the service status and health.

Performance

Capacity

The service shall achieve a quality that is sufficient to ensure the service is fit for purpose.
Response time

The service shall achieve a quality that is sufficient to ensure the service is fit for purpose.

Reliability

Availability

The service shall achieve a quality that is sufficient to ensure the service is fit for purpose.
Recoverability

The service shall achieve a quality that is sufficient to ensure the service is fit for purpose.

Security

Confidentiality

The service shall ensure confidentiality by using SWIM Technical Infrastructure (TI) Yellow Profile bindings.
Integrity

The service shall ensure integrity by using SWIM Technical Infrastructure (TI) Yellow Profile bindings.

Quality of Data

Quality of Data

The information offered by the service shall be verified by the service provider. The information offered by the service shall be encoded according to the rules of the AIRM standard.

Authentication

The service shall ensure consumer authentication in accordance with EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile requirement SWIM-TIYP-0042 (use of a X.509 certificate). The service shall ensure provider authentication in accordance with EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile requirement SWIM-TIYP-0042 (use of a X.509 certificate).
Authorisation

The service shall ensure that satisfactory authorisation is put in place according to EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile requirement SWIM-TIYP-0070. The specific details of the authorization verification are left as an implementation choice for the service provider, they could include aspects like: Number of active contract requests by the consumer, Number of pending contract requests by the consumer, Consumer permissions.
Confidentiality

The service shall ensure point-to-point confidentiality in accordance with EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile through the use of Transport Layer Security (TLS) 1.2 or above.
Integrity

The service shall ensure point-to-point integrity in accordance with EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile through the use of Transport Layer Security (TLS) 1.2 or above.

ANSP

Air Navigation Service Provider
AO

Aircraft Operator
API

Application Programmable Interface
ATM

Air Traffic Management
ATN

Aeronautical Telecommunication(s) Network
ATS B2

Air Traffic Services Baseline 2
CDA

Current Data Authority
CM

Context Management
CP1

Common Project 1
DLIC

Data Link Initiation Capability
EASA

European Union Aviation Safety Agency
EC

European Commission
EPP

Extended Projected Profile
EUROCAE

European Organisation for Civil Aviation Equipment
GAT

General Air Traffic
GDSS

Ground Distribution Service Specification
ICAO

International Civil Aviation Organization
ICD

Interface Control Document
LOF

Log-On Forwarding message (OLDI)
LS

Logon Service
NAN

Next Authority Notified message
NDA

Next Data Authority
NM

Network Manager
OLDI

On-Line Data Interchange
SASL

Simple Authentication and Security Layer
SES

Single European Sky
SWIM

System Wide Information Management
TI

Technical Infrastructure
UUIDv4

Universally Unique Identifier version 4
VDLm2

VHF Digital Link Mode 2
WS

Web Services
XML

Extensible Markup Language
XSD

XML Schema Definition

Filter Encoding

The following interfaces shall allow for the selection of subscription based on clearly defined criteria: Flight Status Subscription Management Interface, Subscription Management Interface. Subscription and AMQP 1.0 message filtering can be done based on the value of this "application-property" using the "APACHE.ORG:SELECTOR" syntax. The service may support other filters based on the operators defined in the OGC Filter Encoding 2.0 Encoding Standard on a case by case basis.

Name

ADS-C GDSS

Definition

The ADS-C Ground Distribution Service distributes to ground users the ADS-C data collected from ATS B2 equipped aircraft by the ADS-C Common Service.

AIRM Correspondence

urn:aero:airm:1.0.0:ConceptualModel:Subjects:BaseInfrastructure:SurveillanceInfrastructure:AutomaticDependentSurveillanceContract

Datatype

Not applicable - Information Concept

Typical Behaviour

The service behaviour shall be in accordance with the patterns detailed in the Message Exchange Patterns: Identification Guidelines. The service behaviour is completely described in the EUROCONTROL Specification for Data Link Ground Distribution SWIM Services in chapter 5 containing all sequence diagrams for each interfaces of the service.

A service monitoring mechanism shall be made available to service consumers. The Service Status Monitoring Interface covers the Service Monitoring requirement.

Demand Contract Request Interface

The Demand Contract Request Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to request the creation of a demand contract with a specific aircraft.

PROVIDER_SIDE
- demandContractRequest
  
  The Demand Contract Request Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to request the creation of a demand contract with a specific aircraft. The Consumer receives a "demandContractReply" confirming the Demand Contract Request has been delivered.
  
  git
  Messages
  
  demandContractRequest
  
  IN
  
  demandContractReply
  
  OUT
Endpoints

Restricted
- SWIM_TI_YP_1_1_WS_LIGHT
  
  The WS Light Interface Binding as detailed in the EUROCONTROL Specification for SWIM Technical Infrastructure Yellow Profile, edition 1.1.
- Selected network interface binding
  
  The service shall use the network bindings of the SWIM Technical Infrastructure (TI) Yellow Profile.
- SWIM_TI_YP_1_1_WS_LIGHT
  
  1.1
- demandContractRequest
  
  This message allows a service consumer to request the creation of a demand contract with a specific aircraft.
- demandContractReply
  
  Reply message to the demandContractRequest confirming the Demand Contract Request has been delivered.
Service Status Monitoring Interface

The Service Status Monitoring Interface allows a consumer to retrieve updates of the SWIM ADS-C Ground Distribution Service health and operational status.

PROVIDER_SIDE
- publish
  
  This operation allows the interface consumer to retrieve updates of the SWIM ADS-C Ground Distribution Service health and operational status.
  git
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  The WS Light Interface Binding as detailed in the EUROCONTROL Specification for SWIM Technical Infrastructure Yellow Profile, edition 1.1.
- Selected network interface binding
  
  The Service Status Monitoring Interface shall be conformant with the SWIM-TI Yellow Profile (v1.1+) Network Interface Bindings Specification.
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  1.1
Flight Status Interface

The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query: The ICAO 24-bit aircraft address based on the information available to the ADS-C Common Service based on the logon information received, The flight status of the aircraft, The last report of the aircraft.

PROVIDER_SIDE
- Get icao Aircraft Address
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the ICAO 24-bit aircraft address based on the information available to the ADS-C Common Service based on the logon information received.
  git
  Messages
  
  getAircraftAddressRequest
  
  IN
  
  getAircraftAddressReply
  
  OUT
- Get Flight Status
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the flight status of the aircraft.
  git
  Messages
  
  getFlightStatusRequest
  
  IN
  
  getFlightStatusReply
  
  OUT
- Get Last Report
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the last report of the aircraft.
  git
  Messages
  
  getLastReportRequest
  
  IN
  
  getLastReportReply
  
  OUT
- Get Last Demand Report
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the last demand report of the aircraft.
  git
  Messages
  
  getLastReportRequest
  
  IN
  
  getLastReportReply
  
  OUT
- Get Last Event Report
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the last event report of the aircraft.
  git
  Messages
  
  getLastReportRequest
  
  IN
  
  getLastReportReply
  
  OUT
- Get Last Periodic Report
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the last periodic report of the aircraft.
  git
  Messages
  
  getLastReportRequest
  
  IN
  
  getLastReportReply
  
  OUT
- Get Contract Settings
  
  The Flight Status Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to query the contract settings of the aircraft.
  git
  Messages
  
  getContractSettingsRequest
  
  IN
  
  getContractSettingsReply
  
  OUT
Endpoints

Restricted
- SWIM_TI_YP_1_1_WS_LIGHT
- selected network interface binding
  
  The service shall use the network bindings of the SWIM Technical Infrastructure (TI) Yellow Profile.
- SWIM_TI_YP_1_1_WS_LIGHT
  
  1.1
- getAircraftAddressRequest
  
  This message allows a service consumer to query the ICAO 24-bit aircraft address.
- getAircraftAddressReply
  
  The reply message of the aircraft address request containing the ICAO 24-bit aircract address in hexadecimal representation.
- getFlightStatusRequest
  
  This message allows a service consumer to query the flight status of the flight.
- getFlightStatusReply
  
  The reply message of the flight status request detailing the status of the flight.
- getLastReportRequest
  
  This message allows a service consumer to query the last report of the flight.
- getLastReportReply
  
  The reply message of the last report request detailing the last report of the flight.
- getContractSettingsRequest
  
  This message allows a service consumer to query contract settings of the flight.
- getContractSettingsReply
  
  The reply message of the last report request detailing the contract settings of the flight.
Flight Status Subscription Management Interface

The Flight Status Subscription Management Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to subscribe to flight status changes he is interested in to receive via the Flight Status Data Publication Interface.

PROVIDER_SIDE
- subscribe
  
  This operation allows a consumer of the SWIM ADS-C Ground Distribution Service to subscribe to flight status changes he is interested in to receive, via the Flight Status Data Publication Interface.
  git
  Messages
  
  flightStatusSubscriptionRequest
  
  IN
  
  flightStatusSubscriptionReply
  
  OUT
- unsubscribe
  
  This operation allows a service consumer to unsubscribe from the flight status changes he is subscribed to.
  git
  Messages
  
  flightStatusUnsubscriptionRequest
  
  IN
  
  flightStatusUnsubscriptionReply
  
  OUT
- list subscriptions
  
  This operation allows a service consumer to obtain the list of subscriptions.
  git
  Messages
  
  getFlightStatusSubscriptionsRequest
  
  IN
  
  getFlightStatusSubscriptionsReply
  
  OUT
- subscription details
  
  This operation allows a service consumer to obtain information on a specific subscriptions.
  git
  Messages
  
  flightStatusSubscriptionDetailsRequest
  
  IN
  
  flightStatusSubscriptionDetailsReply
  
  OUT
Endpoints

Restricted
- SWIM_TI_YP_1_1_WS_LIGHT
- selected network interface binding
  
  The service shall use the network bindings of the SWIM Technical Infrastructure (TI) Yellow Profile.
- SWIM_TI_YP_1_1_WS_LIGHT
  
  1.1
- flightStatusSubscriptionRequest
  
  This message allows a consumer of the service to subscribe to flight status changes he is interested in.
- flightStatusSubscriptionReply
  
  The reply message of the flight status subscription request confirming the subscription was successfully created.
- flightStatusUnsubscriptionRequest
  
  This message allows a consumer of the service to unsubscribe to a subscription he previously made on a flight status change.
- flightStatusUnsubscriptionReply
  
  The reply message of the flight status unsubscription request confirming the unsubscription was successful.
- getFlightStatusSubscriptionRequest
  
  This message allows a consumer of the service to list the subscriptions he is currently subscribed to.
- getFlightStatusSubscriptionReply
  
  The reply message of the list subscriptions request which is confirmed and detailing the list of flights status subscriptions he has.
- flightStatusSubscriptionDetailsRequest
  
  This message allows a consumer of the service to get the details of his subscriptions.
- flightStatusSubscriptionDetailsReply
  
  The reply message of the subscriptions details request which is confirmed and giving the details of the subscriptions the service consumer.
Flight Status Data Publication Interface

The Flight Status Data Publication Interface allows a consumer to obtain updates of the ADS-C exchanges of the flights he is interested in. It provides two ways of doing so: By creating an endpoint from which a consumer can listen to updates of flights matching certain filtering criteria defined in a subscription created through the Flight Status Subscription Management Interface. In which case he will receive in its subscription response the endpoint address created specifically for his subscription. The dynamic endpoint created for a specific subscription is labelled by /
in this document, the specific value taken by the
placeholder is resolved in runtime and provided in the subscription response. By defining a number of preconfigured static endpoints where predefined filters are already applied. These preconfigured static endpoints do not require the creation of a specific subscription by the consumer, they are created in design-time by the service provider and are readily available for any consumer, subject to authorization verification. These static endpoints are labelled by / in this document, the specific values taken by these endpoints is defined by the service provider during design-time.

PROVIDER_SIDE
- Publish
  
  This operation allows the service provider to publish flight status updates to service consumers based on their subscriptions. By creating an endpoint from which a consumer can listen to updates of flights matching certain filtering criteria defined in a subscription created through the Flight Status Subscription Management Interface. In which case he will receive in its subscription response the endpoint address created specifically for his subscription. The dynamic endpoint created for a specific subscription is labelled by /
  in this document, the specific value taken by the
  placeholder is resolved in runtime and provided in the subscription response.
  git
  Messages
  
  flightstatus on / dynamic endpoint, AMQP node
  
  OUT
- Publish
  
  By defining a number of preconfigured static endpoints where predefined filters are already applied. These preconfigured static endpoints do not require the creation of a specific subscription by the consumer, they are created in design-time by the service provider and are readily available for any consumer, subject to authorization verification. These static endpoints are labelled by / in this document, the specific values taken by these endpoints is defined by the service provider during design-time.
  git
  Messages
  
  flightstatus on / predefined static endpoint, AMQP node
  
  OUT
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  The AMQP_MESSAGING Interface Binding as detailed in the EUROCONTROL Specification for SWIM Technical Infrastructure Yellow Profile, edition 1.1
- selected network interface binding
  
  The service shall use the network bindings of the SWIM TIYP. AMQP 1.0 shall be used to distribute messages as explained in the Publish/Subscribe Push MEP: Implementation Guidance: https://reference.swim.aero/technical-infrastructure/guidance-for-pub-sub-push-implementation.html
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  1.1
Subscription Management Interface

The Subscription Management Interface allows a consumer of the SWIM ADS-C Ground Distribution Service to select the set of datalink messages he is interested to receive via the Data Publication Interface.

PROVIDER_SIDE
- subscribe
  
  This operation allows a consumer of the SWIM ADS-C Ground Distribution Service to select the set of datalink messages he is interested to receive via the Data Publication Interface.
  git
  Messages
  
  subscriptionRequest
  
  IN
  
  subscriptionReply
  
  OUT
- unsubscribe
  
  This operation allows a service consumer to unsubscribe from the set of datalink messages changes he is subscribed to.
  git
  Messages
  
  unsubscriptionRequest
  
  IN
  
  unsubscriptionReply
  
  OUT
- list subscriptions
  
  This operation allows a service consumer to obtain the list of subscriptions.
  git
  Messages
  
  getsubscriptionsRequest
  
  IN
  
  getsubscriptionsReply
  
  OUT
- subscription details
  
  This operation allows a service consumer to obtain information on a specific subscriptions.
  git
  Messages
  
  subscriptionDetailsRequest
  
  IN
  
  subscriptionDetailsReply
  
  OUT
Endpoints

Restricted
- SWIM_TI_YP_1_1_WS_LIGHT
- selected network interface binding
  
  The service shall use the network bindings of the SWIM Technical Infrastructure (TI) Yellow Profile.
- SWIM_TI_YP_1_1_WS_LIGHT
  
  1.1
- subscriptionRequest
  
  This message allows a consumer of the service to subscribe to a set of datalink messages he is interested in.
- subscriptionReply
  
  The reply message of the subscription request indicating the subscription is confirmed.
- unsubscriptionRequest
  
  This message allows a consumer of the service to unsubscribe to a subscription he previously made.
- unsubscriptionReply
  
  The reply message of the flight status unsubscription request confirming the unsubscription was successful.
- getSubscriptionRequest
  
  This message allows a consumer of the service to list the subscriptions he is currently subscribed to.
- getSubscriptionReply
  
  The reply message of the list subscriptions request which is confirmed and detailing the list of subscriptions he has.
- subscriptionDetailsRequest
  
  This message allows a consumer of the service to get the details of his subscriptions.
- subscriptionDetailsReply
  
  The reply message of the subscriptions details request which is confirmed and giving the details of the subscriptions the service consumer.
Data Publication Interface

The Data Publication Interface allows a consumer to obtain updates of the ADS-C exchanges of the flights he is interested in. It provides two ways of doing so: By creating an endpoint from which a consumer can listen to updates of flights matching certain filtering criteria defined in a subscription created through the Subscription Management Interface. In which case he will receive in its subscription response the endpoint address created specifically for his subscription. The dynamic endpoint created for a specific subscription is labelled by /
in this document, the specific value taken by the
placeholder is resolved in runtime and provided in the subscription response. By defining a number of preconfigured static endpoints where predefined filters are already applied. These preconfigured static endpoints do not require the creation of a specific subscription by the consumer, they are created in design-time by the service provider and are readily available for any consumer, subject to authorization verification. These static endpoints are labelled by / in this document, the specific values taken by these endpoints is defined by the service provider during design-time.

PROVIDER_SIDE
- publish
  
  This operation allows the service provider to publish flight status updates to service consumers based on their subscriptions. By creating an endpoint from which a consumer can listen to updates of flights matching certain filtering criteria defined in a subscription created through the Flight Status Subscription Management Interface. In which case he will receive in its subscription response the endpoint address created specifically for his subscription. The dynamic endpoint created for a specific subscription is labelled by /
  in this document, the specific value taken by the
  placeholder is resolved in runtime and provided in the subscription response.
  git
  Messages
  
  / dynamic endpoint, AMQP node
  
  OUT
- publish
  
  By defining a number of preconfigured static endpoints where predefined filters are already applied. These preconfigured static endpoints do not require the creation of a specific subscription by the consumer, they are created in design-time by the service provider and are readily available for any consumer, subject to authorization verification. These static endpoints are labelled by / in this document, the specific values taken by these endpoints is defined by the service provider during design-time.
  git
  Messages
  
  / predefined static endpoint, AMQP node
  
  OUT
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  The AMQP_MESSAGING Interface Binding as detailed in the EUROCONTROL Specification for SWIM Technical Infrastructure Yellow Profile, edition 1.1
- selected network interface binding
  
  The service shall use the network bindings of the SWIM TIYP. AMQP 1.0 shall be used to distribute messages as explained in the Publish/Subscribe Push MEP: Implementation Guidance: https://reference.swim.aero/technical-infrastructure/guidance-for-pub-sub-push-implementation.html
- SWIM_TI_YP_1_1_AMQP_MESSAGING
  
  1.1

EUROCONTROL Specification for Data Link Common Services for the Aeronautical Telecommunication Network (ATN), edition 1.0

This specification contains requirements for the ground implementation of data link common services for the Aeronautical Telecommunications Network (ATN) as defined by ICAO Annex 10 (Volume III, Part 1) https://www.eurocontrol.int/publication/eurocontrol-specification-data-link-common-services-aeronautical-telecommunication - 11/12/23

SERVICE_SPECIFICATION

-
EUROCONTROL Specification for SWIM Service Description, EUROCONTROL-SPEC-168, Edition 2.0

This specification contains requirements for service descriptions in the context of System Wide Information Management (SWIM) in Europe. https://www.eurocontrol.int/publication/eurocontrol-specification-swim-service-description-sd - 15/03/22

SERVICE_SPECIFICATION

-
EUROCONTROL Specification for SWIM Information Definition, EUROCONTROL-SPEC-169, Edition 1.0

The EUROCONTROL Specification for SWIM Information Definition contains requirements for information definitions in the context of iSWIM in Europe. https://www.eurocontrol.int/publication/eurocontrol-specification-swim-information-definition - 01/12/17

INFORMATION_DEFINITION

-
EUROCONTROL Specification for SWIM Technical Infrastructure (TI) Yellow Profile, EUROCONTROL-SPEC-170, Edition 1.1

The EUROCONTROL Specification for SWIM Technical Infrastructure Yellow Profile contains requirements for system interfaces (e.g. protocols) and for IT infrastructure capabilities required to enable a reliable, secure and efficient exchange of information in the context of iSWIM. This contributes to technical interoperability. https://www.eurocontrol.int/publication/eurocontrol-specification-swim-technical-infrastructure-ti-yellow-profile 05/07/20

SERVICE_SPECIFICATION

-
SESAR PJ38 PJ38-ADSCENSIO DEMOR Release 2, Deliverable D.1.2

Aircraft can provide essential information to support accurate and reliable trajectory prediction or alternative scenarios during the execution of a flight. The EU-funded PJ38-W3-ADSCENSIO project will improve several characteristics of air traffic control through the better prediction of flightsâ behaviour. The project demonstrated the improvements in several operations performed by air traffic controllers as well as the efficiency and strength of a technological infrastructure to support the data link communications between the aircraft and ground on trajectory-related exchanges. The adoption of technical and operational solutions reduced controller workload in high traffic conditions, increase airspace capacity, and reduce flight delays, fuel consumption and CO2 emissions. https://cordis.europa.eu/project/id/101017626/results 27/06/23

OTHER

-
EUROCAE, ED-228A, Safety and Performance Requirements Standard for Baseline 2 ATS Data Communications (Baseline 2 SPR Standard)

This standard provides the operational, safety, and performance requirements (SPR) for the implementation of data communication services that support air traffic services (ATS). https://eshop.eurocae.net/eurocae-documents-and-reports/ed-228a/# - 2016

SERVICE_STANDARD

-
EUROCAE, ED-228B, Safety and Performance Requirements Standard for Baseline 2 ATS Data Communication

This standard provides the operational, safety, and performance requirements (SPR) for the implementation of data communication services that support air traffic services (ATS). It is intended to support the communication element of the implementation of communication, navigation, and surveillance / air traffic management (CNS/ATM) systems in worldwide application. Revision B will take into account results from SESAR and NextGen validation exercises. It will also align the standard to relevant ICAO documentation and remove the D-RNP Requirements. https://www.eurocae.net/news/posts/2023/october/ed-228b-safety-and-performance-standard-for-baseline-2-ats-data-communication/ - 09/23

SERVICE_STANDARD

-
EUROCAE, ED-229-A Interoperability Requirements Standard for Baseline 2 ATS Data Communications (Baseline 2 Interop Standard)

This document provides the interoperability requirements (INTEROP) standard for the implementation of the Air Traffic Service (ATS) applications supporting the Baseline 2 data link services as specified in the Baseline 2 Safety and Performance Requirements (SPR) document [10]. This document addresses the interoperability of the ATS applications using the Aeronautical Telecommunication Network (ATN). https://eshop.eurocae.net/eurocae-documents-and-reports/ed-229a/ - 01/01/2016

SERVICE_STANDARD

-
EUROCAE, ED-229B, Interoperability Requirements Standard for Baseline 2 ATS Data Communication

This document provides the interoperability requirements (INTEROP) standard for the implementation of the Air Traffic Service (ATS) applications supporting the Baseline 2 data link services as specified in the Baseline 2 Safety and Performance Requirements (SPR) document. Revision B takes into account results from SESAR and NextGen validation exercises, and maintaining portable data link services and applications independent, to the maximum extent practical, of the underlying network technology. Revision B will take into account results from SESAR and NextGen validation exercises. It will also align the standard to relevant ICAO documentation and remove the D-RNP Requirements. https://www.eurocae.net/news/posts/2023/october/ed-229b-interoperability-requirements-standard-for-baseline-2-ats-data-communications/ 09/23

SERVICE_STANDARD

-
OASIS, Advanced Message Queuing Protocol (AMQP)

The Advanced Message Queuing Protocol (AMQP) is an open internet protocol for business messaging. It defines a binary wire-level protocol that allows for the reliable exchange of business messages between two parties. AMQP has a layered architecture and the specification is organized as a set of parts that reflects that architecture. Part 1 defines the AMQP type system and encoding. Part 2 defines the AMQP transport layer, an efficient, binary, peer-to-peer protocol for transporting messages between two processes over a network. Part 3 defines the AMQP message format, with a concrete encoding. Part 4 defines how interactions can be grouped within atomic transactions. Part 5 defines the AMQP security layers. https://docs.oasis-open.org/amqp/core/v1.0/os/amqp-core-messaging-v1.0-os.html 10/12

PROTOCOL_SPECIFICATION

-
EUROCONTROL, Message Exchange Patterns: Identification Guidelines

A message exchange pattern (MEP) identifies a repeatable sequence of messages exchanged between two systems, specifying the order, direction and cardinality of these messages (e.g. Request/Reply, Publish/Subscribe). https://reference.swim.aero/technical-infrastructure/message-exchange-patterns-identification-guidelines.html 02/07/19

OTHER

-
SESAR Deployment Programme Edition 2022

The SESAR Deployment Programme provides a common workplan to all operational stakeholders involved in the deployment of Regulation (EU) n. 2021/116, so called Common Project One (CP1), clearly defining the scope of the implementation activities, the synchronisation needs, as well as the suggested deployment approach. https://assets.ctfassets.net/krj50g99u3hm/3UqsgbBqgoXAPsnTXromQ4/6b4c06833b036866206b58fd69d63a0f/SESAR_Deployment_Programme_2022_approved.pdf

OTHER

-
AMQP 1.0 Filters

https://www.amqp.org/specification/1.0/filters

PROTOCOL_SPECIFICATION

-
Operation Excellence Programme Workstream 12.2 Concept of Operations (Deliverable DEL2.1-1)

The objective of this document is to describe the Concept of Operations (CONOPS) upon which the development of standardisation material will be prepared for the Operational Excellence Programme (OEP) workstream topic 12.2 to support implementation of the CP1 regulation [Ref 11] on ATM Functionality 6 (AF6) (Initial Trajectory Sharing). https://www.eurocontrol.int/sites/default/files/2022-10/eurocontrol-oep-12-2-workshop-conops-edition-1-0.pdf

OTHER

-
Commission Implementing Regulation (EU) No 2021/116 of 1 February 2021 on the establishment of the Common Project One

The Single European Skys ATM Research project, SESAR, is one of the most ambitious modernisation projects launched by the European Union, contributing to the implementation of the Single European Sky. SESARs goal is to define, develop and deploy the technological solutions needed to increase the performance and digitalisation of Europes ATM system in the most cost-, flight-efficient and environmentally friendly conditions. The adoption of the Reg. (EU) n. 716/2014 (Pilot Common Project or PCP), the establishment of the SESAR Deployment Manager as per Reg. (EU) n. 409/2013, as well as the subsequent elaboration of the initial SESAR Deployment Programme, marked all together a key step towards the Deployment Phase of SESAR. https://www.sesardeploymentmanager.eu/news/common-project-1-a-new-european-regulation-ensuring-the-continuation-of#:~:text=2021%2F116%2C%20Common%20Project%201,(ATM)%20modernisation%20in%20Europe 02/02/2021

POLICY_DOCUMENT

-

ADS-C Ground Distribution SWIM Service v 1.0

Categorisation

Provider